Make Your Colorbond Roofing Last a Lifetime with These Tips

In an ideal scenario, when you purchase metal roofing materials online and have these installed in your home, they should last a lifetime.

But despite the many benefits offered by Colorbond roofing, there are some property owners who have encountered problems with their roofs early on. In order to avoid these problems and have a roof that is both beautiful and functional (and will be sure to last a lifetime), here are some helpful tips that you can follow during installation.

Standard drip edge

If you are going to install metal roofing for a standard drip edge, start out by folding the roofing sheet and then cutting and folding the standing seam panel over the drip edge. Make sure you cover the eaves and gable ends.

Layover applications

If the roof is going to be laid on a flat layer of existing roofing, use a C-D edge trim. This will allow you to hide the drip edge and other exposed edges of the current roof.

Standard valley

Using hand tongs, create valleys from roof pans by refolding its male and female legs. After that, crease the valley using a site break.

Remember to install the drip edges and ridge caps first. After that, valley fit and then attach the cleats. The bottom portion should be folded around the drip edge while the roofing pans are hemmed into the valley hems.

Trims

In order to create a smooth transition at points where the ridge caps meet on gable dormers, create a bow-tie cleat.

If you are going to need a vented ridge cap, make sure that it is installed before the pans. This makes the task easier for you and helps you avoid scratching the pans.

On the other hand, if you need to install a sidewall flashing, you will need to fold the pan’s edge by 90 degrees. Apply the siding over a perpendicular fold. You may also cut and install a counter flashing detail if working near a wall makes the installation of sidewall flashing difficult.

For end-walls and chimney flashingscolorbond roofing | Roofing Files Blog, you can bend the roofing pan up the wall and then unfold the ribs. After that, you can seal these against your home.

For skylight flashing, you will need to fabricate a sidewall flashing into roof pans. However, you have to stop the pans a few centimetres over the skylight. You will also need to install a cleat on butyl so that the head flashing can extend beyond the edge of the skylight toward the roof pan. The upper portion of the head flashing is then hemmed.

Why There’s an Increasing Demand for Corrugated Iron Roofing Today

Durable, versatile and visually appealing, corrugated iron remains the preferred roofing choice for many homeowners, home builders, contractors and architects since the past few decades until today. Whether it’s a new construction project or a just an upgrade or a renovation, more and more Australians choose high-quality corrugated iron such as Zincalume® and Colorbond® because of the many benefits they deliver. And despite the wide range of roofing materials in the market, studies have shown that the demand for corrugated iron roofs has increased significantly through the recent years.

While it’s not surprising why corrugated iron remains a premium roofing choice, the following are the reasons why the demand for it grows even bigger these days:

New technology. Advancements in technology have made it possible for leading manufacturers to engineer corrugated iron sheets that are made for properties of the future. With improved strength, durability and added features such as fire-resistant, anti-pest and weatherproofing abilities, more and more builders choose corrugated metal roofs.

Faster project completion. In construction, the longer a project takes, the more expensive it gets. That’s why homebuilders today are continuously looking for solutions that speed up their projects without sacrificing quality. Thanks to their lightweight material and flexibility, corrugated iron roofs offer impressive installation speed that help users save time and therefore money.

Extra protection from extreme weather changes. Drastic weather shifts are increasingly becoming the new normal. This phenomenon requires property owners in Australia to invest in high-quality roofing that will help them maintain safe, comfortable interiors in the midst of climate change.

Power saving. A high-quality, properly installed roof offers good insulation, allowing property owners to use energy efficiently. Their heating and cooling systems won’t be too overworked even despite extreme weather, resulting in lower energy consumption and lower power bills.

Sustainability. People today put great importance on sustainable living. Every choice you make should be in consideration to its effect to the Earth and its natural resources. When you choose quality corrugated iron, you choose longevity. Your roof can withstand weather elements, termites, algae and mould growth, and premature wear and tear. It can last you for a lifetime, helping you avoid waste and inefficient use of construction materials.

Diverse style. In the past, properties in the same neighbourhood would carry the same exact look and style, that they’re often called “little boxes.” Not anymore. Residential and commercial properties now come in all sorts of shapes and colours. Fortunately, corrugated iron roofs come in a wide range of finishes and textures, making it possible for property owners to make their vision a reality.

Corrugated Iron – A Roofing Material Like No Other

colorbond classic cream | metal roofing online

No other building material has been invariably tied to the history of Australia more than corrugated iron. This popular and versatile material is used in the country, not only for roofing, but also in sheds and water tanks.

It is fairly easy to understand why. Among all the building materials available, especially in the past, this type of structural sheet iron can be readily transported across various areas in the country. It is versatile and can easily withstand the harsh conditions of Australia. It may also be said that this building material perfectly blends with the textures and colours of Australia’s diverse landscapes. Today, many of today’s builders and designers are harking back to the philosophies and aesthetics of old builders with regards to the use of this building material.

A quick glimpse into this versatile building material’s history

Contrary to its name, corrugated material is manufactured using steel. Steel sheets are then crimped to provide them with greater strength.

In the past, manufacturers used wrought iron which was then galvanised using zinc. This gave an added protection to it against rust. Later on, plastic coatings were applied to the sheet metal. Apart from giving additional protection to the sheet metal, this made the colour finish more durable. This also made it possible to produce a diverse palette that perfectly suits Australia’s diverse landscape.

Today, manufacturers use Zincalume which combines aluminium, zinc and silicon. Well into the 2000s, Australia has emerged as the top exporter of steel products, banking upon its superior metal coating and painting technologies.

Intertwined histories

But what actually spawned the relationship between Australia and this building material?

Experts attribute this intertwining of histories to the Victorian gold rush which created a big demand for corrugated iron. At that time, prospectors were looking for a cheap, versatile and lightweight material that can be easily used to construct a diverse number of structures. Initially, the building material was imported from England. During that period, the building material was used for constructing prefabricated dwellings and houses, shops, churches and sheds.

A roofing material like no other

Today, corrugated iron roofing sheets remain popular among homeowners, builders and designers. And rightly so, as these offer several advantages over their counterparts. For starters, these roofs are resilient against rust and the elements, enabling them to last up to 100 years. They are resistant to rots and insects. Furthermore, the treatment used in their production make them practically invulnerable against algae. They also provide a high degree of protection against fires.

Additionally, these roofing materials are lightweight which makes them easy to transport, handle and install. These, in turn, can help lower installation costs.

How to Clean Corrugated Iron Roofs

Corrugated Iron | Bayside Roofing Materials

Although corrugated iron roofs are known for their strength and durability, it would be beneficial to maintain a regular cleaning schedule for these in order to prolong their lifespan. The key thing to remember here is to properly clean your home’s roofs without damaging these and without compromising your personal safety while carrying out this task.

But before you proceed, it is worthwhile to check the overall condition of your home’s roofs, especially if you have had these roofs for years. Specifically, you would want to assess the work required as well as potential hazards. Certainly, if you stick to a regular cleaning schedule, this part will be a lot easier.

Next, you need to ensure your safety while cleaning the roofs. Before you step onto the rooftop, you have to make sure that you can access all the parts with great ease. Whenever possible, utilise safety gear like ropes and safety belts. Make sure that you are supported by a stable structure in order to avoid falls.

If you see excess or peeling paint, avoid using metal tools to remove these. Instead, use a wire brush. If you cannot remove the excess or peeling paint, begin with a flat-blade putty knife and then proceed further with a wire brush.

After removing the excess or peeling paint, the next thing that you need to do is to remove the dirt and debris from your roofs. The best way to perform this task is to use a pressure washer, starting out at the highest part of the roof. This will allow the dirt and debris to be carried down. You can also add a small concentration of detergent to the water. Make sure that you keep the distance of the pressure washer’s nozzle and the roofs at an even and uniform distance in order to avoid damaging the roofs.

After you are done cleaning the roof, you can proceed to painting the spots where you removed excess or peeling paint from. Before proceeding, make sure that these areas are fully dry. It would also be beneficial to apply a coat of primer to prevent corrosion. Just make sure that the primer coat is dry before applying your choice of paint.

Remember, keeping a regular cleaning schedule will make the task easier for you in the future. Furthermore, this will help in maintaining your roofs while enhancing the appearance of your home.

Why Roof Flashings Are Necessary

Roof Flashing | Bayside Roofing Materials

A house isn’t complete without a roof. If you care about the appearance of your home, you’d make sure that your roof complements its general style. It’s also important that they remain attractive and strong with little or no maintenance. You don’t want to deal with leaks or water seepage, so to avoid these problems, you need to install roof flashings, which are considered your roof’s final form of defence against water penetration.

Flashings are placed on areas of your roof where various surfaces come together, such as at roof peaks, edges, vents, dormers, and skylights. Flashings are installed in such spots to effectively seal the gaps and prevent water from seeping into them and causing damage not only to your roof but the rest of the building as well. Not only does water weaken the material, but it could also lead to the breeding of mould, bacteria, and fungi, which could be very harmful to the health of the occupants.

Different materials can be used for roof flashings. Your common options are aluminium and galvanised metal. Aluminium, in particular, is quite popular because it is very malleable and can be formed into different shapes. It also doesn’t easily rust.

There are various kinds of flashings to suit differing needs; the most usual one, however, is the v-shaped flashing that typically goes on roofline valleys and peaks. Another important area on the roof that requires flashing is along the bottom edge or drip edge where water, ice, and snow ordinarily collect. You don’t want water going through here as it can spread around the under-layment and cause significant damage. A two-part edge flashing along with a heating strip is commonly installed here. Flashings are normally secured into place with nails, but most roofers also apply layers of sealants to ensure that the roof is totally waterproof.

It’s important that flashings be installed correctly, but even when properly secured into place, the elements can loosen those nails in time so that the flashings start to come off. When caught early, such a problem can be easily remedied with a minor repair service. For this reason, it’s necessary to regularly inspect the condition of your roof so that it doesn’t get to the point that a major repair or even replacement is necessary.

If you go to the right supplier, flashings can be made fast to your custom requirements. Same day service is even available.

SOME TIPS ON HOW TO FIND HIGH QUALITY CORRUGATED IRON SHEETS

Just like with all other structural or architectural parts, you also have to regularly and properly inspect and maintain your roof. As such, it is really important to check your roof once in a while or even just look at it carefully, so that you will know if there is a need to have it fixed or replaced once its condition has really deteriorated.

Since this is a very important and heavy home improvement or renovation job, the first step you need to take is to look for and get all the necessary materials, such as new roofing sheets and materials for roofing insulation. 

After narrowing down your list of the preferred roofing products that are within your budget, go for the best product that is well-known and will stand the test of time. Brands such as Colorbond are highly recognised for their durability. When it comes to any corrugated roofing needs, investing in durability is very important. This will not only give you more years out of the corrugated roof but this option will also provide you peace of mind and security, and it will add to the value of the home, in case you plan to re-sell this in the future.

And if you are thinking of investing in some corrugated iron sheets to use for your new roof, if you do your research well, you will be able to get such products at reasonable prices like here at Metal Roofing Online.

We supply a varied customer base with Colorbond roofing materials and include builders and roofing contractors. We offer our customer base the opportunity to source their supplies from just one company and generally manage to get them at discounted rates. 

We offer supplies that are high-quality materials that come in affordable rates as well.

Author Profile: Shawn Warner is a passionate “DIY’er” and roofer. He writes posts on home building, kitchen renovations, metal roofs and gardening. To find out more about guttering, roofing sheeting and other metal roof materials, he visits websites like www.metalroofingonline.com.au.

Image

 

photo credit nicety.livejournal.com

 

Image

 

photo credit apartment therapy

 

 

 

Colorbond or Zincalume? What are the prices? Which should I choose?

When deciding on the metal roofing sheets for your next roofing or walling project – the big question is – do I use Colorbond or Zincalume sheets? Why the difference in price between the two? 

Image

There are many differences!

Colorbond – comes in a selection of 22 colours – with new additions just released!

Zincalume is plan “silver” colour, which sometimes gets mixed up with “gal”.  Galvanised steel sheets are very rarely used these days!

What is the warranty?

Colorbond and Zincalume can both be up to 30 years!

What is the difference in prices?

Between the two – Colorbond can be around $3.00 more per lineal metre than Zincalume. 

Colorbond, with the most popular roofing profile “custom orb” is also generally the more popular out of the two – the colour selections are too vast to pass up on!

Trimdek is also another popular choice – the prices are very similar to corrugated. 

 

Professional Advice

A pitched roof is one of the largest, most visable aspects of your home and with a diverse and inspiring colour palette, Colorbond allows a varied selection in choice.

Colorbond-metalroofingonline

We have found the most popular colours architects and designers select, to be the greys and neutral colours – Woodland Grey as always is a huge hit and Monument is quickly gaining popularity. The newest in the Colorbond Colour range – Basalt, well we imagine it will add depth and drama to any project. Plus it is a personal favourite of mine!

The traditional colours are purely timeless and immune to fashion trends, which come and go so quickly. Colours such as Classic Cream, Cottage Green and Manor Red have always stood the test of time.

Whichever your selection from the Colorbond Colour range for use on your next metal roofing project, whether hamonising or contrasting into your surroundings, you can be sure it will stand the test of time.